+91-9835139863 / 9534009648   |   info@maxenggjsr.com

Panel Buldings

Power Distribution Panel

Power Distribution Board is a system, consisting of a Main Distribution Board (MDB), Sub Main Distribution Boards (SMDBs) and Final Distribution Boards, by which the electrical energy is transmitted via branches to reach the exact end user.
An MDB is a panel or enclosure that houses the fuses, circuit breakers and ground leakage protection units where the electrical energy, which is used to distribute electrical power to numerous individual circuits or consumer points, is taken in from the transformer. An MDB typically has a single or multiple incoming power sources and includes main circuit breakers and residual current or earth leakage protection devices. A MDB is comprised of a free standing enclosure, a bus bar system, MCCB's, metering and support equipments and required current transformers. Panels are assembled in a systematic manner such as incomer section and outgoing section.
Key features of Main Distribution Boards
⇒ Fully type tested assemblies as per customers specifications
⇒ Rated upto 6000A
⇒ Rated operating voltage upto 440 Volts
⇒ Designed for both withdrawable & fixed versions
⇒ Ample cabling space for easy connections
⇒ Top and bottom cable entry.
⇒ Panels for front or rear access to suit application
⇒ Index of protection : IP 31 & IP 54
⇒ Floor mounting
⇒ Maximum safety & reliability
⇒ Modular system with Customized design to meet end user requirements.


Feeder pillar Board are manufactured from galvanized/electro galvanized steel sheets or CRCA sheets. Single doors or Double doors front and rear constructions are available on request with Canopy to make it a complete Rain Proof including Dust and Vermin proof. These Feeder Pillars are generally installed Outside, like streets, foothpaths, General Pavements, Outside Factories. These include instrument panel with voltmeters, ammeters, service fuses and selector switches. The built, structure and designs are suitable to all kinds of lighting applications.
Key features of Feeder pillar or Lighting Control Panels
⇒ Designed for internal & external applications.
⇒ 630A main busbar rating.
⇒ Offered in single/ Double walled aluminum or GRP enclosures
⇒ Index of protection : IP 55 & IP 56

Fire Fighting MCC Panel

Assisted by the skilled workforce and advanced manufacturing unit, we are offering a wide range of Fire Fighting MCC Panel to the clients. This panel is widely used in many industries for detecting and controlling fire in the initial stage and is suitable in case of fire breakouts, sprinkle, control panel incorporates hydrant and many more. It is manufactured with the help of advanced technology and using the finest quality components procured from certified vendors of the market. This Fire Fighting MCC Panel can be purchased from us at market-competent prices.
Features :
In built starter
Completely automatic operation
Digital display as well as parameters
Completely separate terminal for stand by pump
No automatic off for main hydrant pump
Automatic operation of Main & jockey pumps
RPM Measurement
Fault Alarms on the controller display
Engine start stop – Manual and Remote
Magnetic Pick-up input for speed measurement
Lamp indications
Easy Auto / Manual operation




Lighting Distribution Boards are an integral and essential part of every building project and it must be designed, manufactured and installed all in accordance with the safety standards. In most of the cases it operates a layman wherein others operate dedicated or trained personnels. This article explains what are the essential standards, parts, frame to be applied for manufacturing and installation of lighting distribution boards in a quality building project.
Construction of Lighting Distribution Boards (LDB)
⇒ The LDB basically constructed of 1.6 mm thick CRCASheet
⇒ The LDB preferably wall mounting, indoor type with proper neoprene gaskets at doors and joints to ensure dust and vermin-proof enclosures.
⇒ The top and bottom of the LDB's have detachable gland plates for cable entry.he LDB's have Seperate Incoming feeder compartment, with proper barriers between incoming and outgoing feeders. A separate Chamber of Cable Alley is provided with Connectors for final terminations.
⇒ The Busbars Consists of Electrolyte Aluminium or tinned copper. Adequate space shall be provided at the top and bottom to facilitate easy termination of incoming and outgoing cables.
⇒ The earthing terminals shall be provided


Local Control Stations & JB

The robust design of Max vortex flowmeters provides high performance and reliability in liquid, gas and steam measurements. Equipped with digital signal processing (DSP) and advanced filtering techniques, these innovative flowmeters from ABB allow excellent flow signal detection and provide measurement immunity from the effects of hydraulic noise and pipeline vibration.